Density CalculatorMeasure mass. Define volume.

Density calculators / Mixtures & composition

A clear measure of matter.

Average Density Calculator

Calculate mass-weighted overall sample density from separately measured masses and additive volumes.

Your measurements & units

kg
L
kg
L

Starting values are editable examples. Confirm the sample, measurement basis and units. Dimension switching converts only the labelled geometry fields; other unit selectors describe the numbers you enter.

Reset

Your result

Ready to calculate

Enter your values and press Calculate. The result will open on the calculation page.

Published references · Clear assumptions · No sign-up

The method

Formula and calculation steps

Overall density=(m1+m2)/(V1+V2).

Calculate mass-weighted overall sample density from separately measured masses and additive volumes.

  1. Confirm the sample, reference state, measurement basis and units.
  2. Enter actual measurements and compatible reference values.
  3. Submit the form, then interpret the result with the assumptions and limits below.

Do not take an unweighted average of densities when volumes differ. Combining reactive or contracting liquids may change total volume.

Average Density: method and interpretation

Calculate mass-weighted overall sample density from separately measured masses and additive volumes. Do not take an unweighted average of densities when volumes differ. Combining reactive or contracting liquids may change total volume.

Mixture density requires a defined composition and a volume model. Adding the component masses is justified by mass conservation, but adding the separate component volumes is an additional assumption. Some solutions contract or expand when mixed.

Mass fraction, mole fraction and volume fraction have different denominators. The labels on this page state the basis actually used. A measured solution density alone does not identify a unique solute concentration without a separate substance-specific calibration.

Check the numbers

Average Density Calculator: calculated examples

These scenarios are computed with the same method as the form. They are not product recommendations, code design values or complete standards tables.

Worked example with stated inputs

Sample 1 mass = 1 kg; Sample 1 volume = 1 L; Sample 2 mass = 2 kg; Sample 2 volume = 1 L.

OutputComputed result
Combined-region average density1,500 kg/m³
Mass density1.5 g/cm³ or g/mL
Mass density93.641941 lb/ft³
Mass density0.054191 lb/in³
Mass density12.518107 lb/US gal
Mass density15.033619 lb/Imperial gal

How the stated input changes the result

ScenarioChanged input / basisResult
0.5 kgSample 1 mass1,250 kg/m³
0.75 kgSample 1 mass1,375 kg/m³
1 kgSample 1 mass1,500 kg/m³
1.25 kgSample 1 mass1,625 kg/m³
1.5 kgSample 1 mass1,750 kg/m³
2 kgSample 1 mass2,000 kg/m³

Unchanged inputs use: Sample 1 mass = 1 kg; Sample 1 volume = 1 L; Sample 2 mass = 2 kg; Sample 2 volume = 1 L. Results retain the model limitations described above.

Common questions

What measurement or model limitation matters here?

Do not take an unweighted average of densities when volumes differ. Combining reactive or contracting liquids may change total volume.

How are the example tables calculated?

Each row changes the labelled sample 1 mass while retaining the other worked-example inputs. The table uses the same Overall density=(m1+m2)/(V1+V2). calculation as the form.

How do I use this average density calculator?

Calculate mass-weighted overall sample density from separately measured masses and additive volumes. Overall density=(m1+m2)/(V1+V2).

Which units should I enter?

Use the unit printed beside each input or chosen in its selector. The dimension-unit switch converts only the length or area fields that carry it. Other quantities retain their printed units. Mass density has dimensions M L⁻³; a ratio, number per area or probability density is a different quantity.

Are starting values measured material or reference data?

They are editable worked-example inputs unless a specific source and reference condition are explicitly identified. Measure or obtain the properties appropriate to the actual sample, temperature and method.

Can I export the result to Excel?

After calculating, Export CSV saves numerical results and submitted inputs. CSV is a text table, not an Excel formula workbook or a certified test report.

Where are the formula sources?

Full source addresses are printed below as ordinary text. The equations, worked examples and comparison tables are contained in these pages and do not require an online data service.

Formula sources and references

References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.

  • OpenStax University Physics: density, pressure and mass per volumehttps://openstax.org/books/university-physics-volume-1/pages/14-1-fluids-density-and-pressure
  • NIST Guide to the SI: conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors