Density calculators / Mass, volume & units
A clear measure of matter.
Density Calculator
Calculate mass density from measured mass and physical volume, with metric and imperial conversions.
Your measurements & units
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
ρ=m/V; m=ρV; V=m/ρ.
Calculate mass density from measured mass and physical volume, with metric and imperial conversions.
- Confirm the sample, reference state, measurement basis and units.
- Enter actual measurements and compatible reference values.
- Submit the form, then interpret the result with the assumptions and limits below.
This page uses mass, not gravitational force. Bulk, true and apparent density depend on the chosen measurement volume.
Density: method and interpretation
Calculate mass density from measured mass and physical volume, with metric and imperial conversions. This page uses mass, not gravitational force. Bulk, true and apparent density depend on the chosen measurement volume.
Mass density compares mass with three-dimensional volume. A density value alone cannot identify both mass and volume: one further independent measurement is required. Units such as g/mL and kg/m³ can be converted without changing the physical sample.
A density triangle is an aid to rearranging ρ=m/V, not a separate physical law. Keep the measurement basis consistent, especially when converting bulk materials, powders or liquids whose temperature may change.
Continue with: Mass from Density and Volume Calculator · Volume from Mass and Density Calculator · Density Unit Converter · Specific Volume to Density Calculator
Check the numbers
Density Calculator: calculated examples
These scenarios are computed with the same method as the form. They are not product recommendations, code design values or complete standards tables.
Worked example with stated inputs
Measured mass = 1 ; Mass unit = kg; Measured volume = 1 ; Volume unit = L.
| Output | Computed result |
|---|---|
| Measured mass per defined volume | 1,000 kg/m³ |
| Converted mass | 1 kg |
| Converted volume | 0.001 m³ |
| Mass density | 1 g/cm³ or g/mL |
| Mass density | 62.427961 lb/ft³ |
| Mass density | 0.036127 lb/in³ |
| Mass density | 8.345404 lb/US gal |
| Mass density | 10.022413 lb/Imperial gal |
How the stated input changes the result
| Scenario | Changed input / basis | Result |
|---|---|---|
| 0.5 | Measured mass | 500 kg/m³ |
| 0.75 | Measured mass | 750 kg/m³ |
| 1 | Measured mass | 1,000 kg/m³ |
| 1.25 | Measured mass | 1,250 kg/m³ |
| 1.5 | Measured mass | 1,500 kg/m³ |
| 2 | Measured mass | 2,000 kg/m³ |
Unchanged inputs use: Measured mass = 1 ; Mass unit = kg; Measured volume = 1 ; Volume unit = L. Results retain the model limitations described above.
Common questions
Can I use a density formula in an Excel worksheet?
Yes: density is mass divided by volume, with both values in compatible units. The CSV export contains numbers and labels; it does not install formulas in an Excel workbook.
How do I derive the dimensional formula of density?
Mass contributes dimension M and volume contributes L³, giving [ρ]=M L⁻³. Relative density is dimensionless because equal dimensions cancel.
What is the density formula triangle?
Put mass above density and volume: divide mass by volume for density, multiply density by volume for mass, or divide mass by density for volume.
How do I calculate density in g/mL or kg/m³?
Choose mass and volume units independently. The calculator converts both to SI and reports equivalent g/mL, g/cm³, kg/m³ and pounds per cubic foot.
How do I use this density calculator?
Calculate mass density from measured mass and physical volume, with metric and imperial conversions. ρ=m/V; m=ρV; V=m/ρ.
Which units should I enter?
Use the unit printed beside each input or chosen in its selector. The dimension-unit switch converts only the length or area fields that carry it. Other quantities retain their printed units. Mass density has dimensions M L⁻³; a ratio, number per area or probability density is a different quantity.
Are starting values measured material or reference data?
They are editable worked-example inputs unless a specific source and reference condition are explicitly identified. Measure or obtain the properties appropriate to the actual sample, temperature and method.
Can I export the result to Excel?
After calculating, Export CSV saves numerical results and submitted inputs. CSV is a text table, not an Excel formula workbook or a certified test report.
Where are the formula sources?
Full source addresses are printed below as ordinary text. The equations, worked examples and comparison tables are contained in these pages and do not require an online data service.
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.
- OpenStax University Physics: density, pressure and mass per volumehttps://openstax.org/books/university-physics-volume-1/pages/14-1-fluids-density-and-pressure
- NIST Guide to the SI: conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors