Density calculators / Crystal & number density
A clear measure of matter.
Unit Cell Theoretical Density Calculator
Calculate theoretical orthorhombic unit-cell density from supplied lattice dimensions and formula-unit count.
Your measurements & units
Your result
Ready to calculateEnter your values and press Calculate. The result will open on the calculation page.
Published references · Clear assumptions · No sign-up
The method
Formula and calculation steps
ρ=Z M/(NA abc); NA=6.02214076×10²³ mol⁻¹.
Calculate theoretical orthorhombic unit-cell density from supplied lattice dimensions and formula-unit count.
- Confirm the sample, reference state, measurement basis and units.
- Enter actual measurements and compatible reference values.
- Submit the form, then interpret the result with the assumptions and limits below.
Requires orthogonal cell axes; Z and molar mass must refer to matching formula units. No automatic crystal-structure recognition or occupancy correction.
Unit Cell Theoretical Density: method and interpretation
Calculate theoretical orthorhombic unit-cell density from supplied lattice dimensions and formula-unit count. Requires orthogonal cell axes; Z and molar mass must refer to matching formula units. No automatic crystal-structure recognition or occupancy correction.
The counted entity must match the molar mass. Atoms, molecules, formula units and mobile electrons are different entities. The Avogadro constant converts a defined amount of substance to a count; it does not identify the material or its electronic state.
A theoretical crystal density uses a supplied cell geometry, matching formula-unit count and occupancy assumptions. Actual defects, vacancies, temperature and porosity can make a specimen’s measured density differ from the ideal cell value.
Continue with: Number Density Calculator · Density Calculator · Mass from Density and Volume Calculator · Volume from Mass and Density Calculator
Check the numbers
Unit Cell Theoretical Density Calculator: calculated examples
These scenarios are computed with the same method as the form. They are not product recommendations, code design values or complete standards tables.
Worked example with stated inputs
Formula units per unit cell Z = 4 ; Matching formula-unit molar mass = 58.44 g/mol; Lattice a = 5.64 ångström; Lattice b = 5.64 ångström; Lattice c = 5.64 ångström.
| Output | Computed result |
|---|---|
| Theoretical unit-cell density | 2,163.624967 kg/m³ |
| Cell volume | 179.406144 ų |
| Mass density | 2.163625 g/cm³ or g/mL |
| Mass density | 135.070694 lb/ft³ |
| Mass density | 0.078166 lb/in³ |
| Mass density | 18.056325 lb/US gal |
| Mass density | 21.684743 lb/Imperial gal |
How the stated input changes the result
| Scenario | Changed input / basis | Result |
|---|---|---|
| 2.82 ångström | Lattice a | 4,327.249933 kg/m³ |
| 4.23 ångström | Lattice a | 2,884.833289 kg/m³ |
| 5.64 ångström | Lattice a | 2,163.624967 kg/m³ |
| 7.05 ångström | Lattice a | 1,730.899973 kg/m³ |
| 8.46 ångström | Lattice a | 1,442.416644 kg/m³ |
| 11.28 ångström | Lattice a | 1,081.812483 kg/m³ |
Unchanged inputs use: Formula units per unit cell Z = 4 ; Matching formula-unit molar mass = 58.44 g/mol; Lattice a = 5.64 ångström; Lattice b = 5.64 ångström; Lattice c = 5.64 ångström. Results retain the model limitations described above.
Common questions
What measurement or model limitation matters here?
Requires orthogonal cell axes; Z and molar mass must refer to matching formula units. No automatic crystal-structure recognition or occupancy correction.
How are the example tables calculated?
Each row changes the labelled lattice a while retaining the other worked-example inputs. The table uses the same ρ=Z M/(NA abc); NA=6.02214076×10²³ mol⁻¹. calculation as the form.
How do I use this unit cell theoretical density calculator?
Calculate theoretical orthorhombic unit-cell density from supplied lattice dimensions and formula-unit count. ρ=Z M/(NA abc); NA=6.02214076×10²³ mol⁻¹.
Which units should I enter?
Use the unit printed beside each input or chosen in its selector. The dimension-unit switch converts only the length or area fields that carry it. Other quantities retain their printed units. Mass density has dimensions M L⁻³; a ratio, number per area or probability density is a different quantity.
Are starting values measured material or reference data?
They are editable worked-example inputs unless a specific source and reference condition are explicitly identified. Measure or obtain the properties appropriate to the actual sample, temperature and method.
Can I export the result to Excel?
After calculating, Export CSV saves numerical results and submitted inputs. CSV is a text table, not an Excel formula workbook or a certified test report.
Where are the formula sources?
Full source addresses are printed below as ordinary text. The equations, worked examples and comparison tables are contained in these pages and do not require an online data service.
Related calculators
Formula sources and references
References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.
- NIST: Redefining the Mole, silicon unit-cell counting relationhttps://www.nist.gov/si-redefinition/redefining-mole
- NIST SP 330, Section 2: defining constants of the SIhttps://www.nist.gov/pml/special-publication-330/sp-330-section-2
- NIST Guide to the SI: conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors