Density CalculatorMeasure mass. Define volume.

Density calculators / Mass, volume & units

A clear measure of matter.

Unit Weight to Density Calculator

Convert unit weight to mass density using supplied gravitational acceleration.

Your measurements & units

kN/m³
m/s²

Starting values are editable examples. Confirm the sample, measurement basis and units. Dimension switching converts only the labelled geometry fields; other unit selectors describe the numbers you enter.

Reset

Your result

Ready to calculate

Enter your values and press Calculate. The result will open on the calculation page.

Published references · Clear assumptions · No sign-up

The method

Formula and calculation steps

ρ=γ/g, with γ converted from kN/m³ to N/m³.

Convert unit weight to mass density using supplied gravitational acceleration.

  1. Confirm the sample, reference state, measurement basis and units.
  2. Enter actual measurements and compatible reference values.
  3. Submit the form, then interpret the result with the assumptions and limits below.

Do not enter a mass-per-volume value as force per volume.

Unit Weight to Density: method and interpretation

Convert unit weight to mass density using supplied gravitational acceleration. Do not enter a mass-per-volume value as force per volume.

Mass density compares mass with three-dimensional volume. A density value alone cannot identify both mass and volume: one further independent measurement is required. Units such as g/mL and kg/m³ can be converted without changing the physical sample.

A density triangle is an aid to rearranging ρ=m/V, not a separate physical law. Keep the measurement basis consistent, especially when converting bulk materials, powders or liquids whose temperature may change.

Check the numbers

Unit Weight to Density Calculator: calculated examples

These scenarios are computed with the same method as the form. They are not product recommendations, code design values or complete standards tables.

Worked example with stated inputs

Unit weight = 19.6133 kN/m³; Local gravitational acceleration = 9.80665 m/s².

OutputComputed result
Mass density from force per volume2,000 kg/m³
Mass density2 g/cm³ or g/mL
Mass density124.855921 lb/ft³
Mass density0.072255 lb/in³
Mass density16.690809 lb/US gal
Mass density20.044826 lb/Imperial gal

How the stated input changes the result

ScenarioChanged input / basisResult
9.80665 kN/m³Unit weight1,000 kg/m³
14.71 kN/m³Unit weight1,500 kg/m³
19.6133 kN/m³Unit weight2,000 kg/m³
24.5166 kN/m³Unit weight2,500 kg/m³
29.42 kN/m³Unit weight3,000 kg/m³
39.2266 kN/m³Unit weight4,000 kg/m³

Unchanged inputs use: Unit weight = 19.6133 kN/m³; Local gravitational acceleration = 9.80665 m/s². Results retain the model limitations described above.

Common questions

What measurement or model limitation matters here?

Do not enter a mass-per-volume value as force per volume.

How are the example tables calculated?

Each row changes the labelled unit weight while retaining the other worked-example inputs. The table uses the same ρ=γ/g, with γ converted from kN/m³ to N/m³. calculation as the form.

How do I use this unit weight to density calculator?

Convert unit weight to mass density using supplied gravitational acceleration. ρ=γ/g, with γ converted from kN/m³ to N/m³.

Which units should I enter?

Use the unit printed beside each input or chosen in its selector. The dimension-unit switch converts only the length or area fields that carry it. Other quantities retain their printed units. Mass density has dimensions M L⁻³; a ratio, number per area or probability density is a different quantity.

Are starting values measured material or reference data?

They are editable worked-example inputs unless a specific source and reference condition are explicitly identified. Measure or obtain the properties appropriate to the actual sample, temperature and method.

Can I export the result to Excel?

After calculating, Export CSV saves numerical results and submitted inputs. CSV is a text table, not an Excel formula workbook or a certified test report.

Where are the formula sources?

Full source addresses are printed below as ordinary text. The equations, worked examples and comparison tables are contained in these pages and do not require an online data service.

Formula sources and references

References support the underlying methods and units. Chosen example inputs are not universal recommendations, supplier ratings, market prices or code limits.

  • OpenStax University Physics: density, pressure and mass per volumehttps://openstax.org/books/university-physics-volume-1/pages/14-1-fluids-density-and-pressure
  • NIST Guide to the SI: conversion factorshttps://www.nist.gov/pml/special-publication-811/nist-guide-si-appendix-b-conversion-factors